Checkline MKM Instrukcja Użytkownika Pobierz pdf (Strona 3)

-3-

2.0 CHARGING THE BATTERY

Before using your tension meter for the first time, the built-in battery must

be charged. The built-in battery should be recharged after every six hours

(maximum) of use.

Plug the battery charger (7) into the appropriate power source. Connect the jack

plug (3) of the battery charger (7) with the charger connector (5) of the tension

meter.

NOTE: Battery charging time is 14 hours.

CAUTION

To avoid damage, do not move the center roller by hand.

-6-

5.0 TECHNICAL INFORMATION

51 Specifications

Calibration According to SCHMIDT factory procedure

Accuracy ± 1% full scale (FS) or ± 1 graduation on scale

Take up speed 16 m/min

Scale diameter 41 mm

Temperature range 10 – 45°C

Air humidity 85% RH, max.

Housing material Plastic (Makrolon)

Housing dimensions 210mm x 225mm x 54 mm (L x W x H)

Weight approx. 650 g (fully assembled and ready to operate)

5.2 Available Models

MKM-50 5 - 50 225 PA: 0.12 mm Ø

MKM-100 10 - 100 225 PA: 0.12 mm Ø

MKM-400 50 - 400 225 PA: 0.20 mm Ø

** Suitable for 95% of applications. PA = Polyamide Monofilament If the

material to be measured differs significantly from the factory calibration material

in diameter, rigidity, shape, etc., we recommend calibration using customer

material. For this purpose, a material sample of about 5 m should be supplied.

International unit for tension force:1 cN = 1.02 g = 0.01 N

Type Tension Measuring Calibration

Range Hand Width Material

cN mm

1 2 3 4 5

Brak uwag

Checkline MKM Instrukcja Użytkownika Strona 3