Checkline TST Instrukcja Użytkownika Pobierz pdf (Strona 8)

Series TS Torque Measurement Test Stands

Load capacity 100 lbin [11.3 Nm]

Speed range 0.3 – 8.6 RPM (4 – 52º/s)

Speed variation with load ±0% (Stepper motor driven)

Maximum angular travel No limit

Manual adjustment 12º/knob rev

Angle indicator resolution 2º

Maximum slider travel 15.50” [394 mm]

Slider travel rate 1.05” [26.6 mm] / lever rev

Line voltage Universal input 80-240 VAC, 50/60 Hz

Fuse type 1.2 A, 250V, 3AG SLO BLO

Weight (test stand, only) TSTM: 35.5 lb [16.1 kg],

TSTMH: 29.5 lb [13.4 kg]

Control Unit weight 2.7 lb [1.2 kg]

Speed accuracy ±5% of setting

TSTM / TSTMH

Using the Control Unit

CCW

Press and hold for counter-clockwise motion, release button to stop. Located on

the face of the Control Unit.

Press and hold for clockwise motion, release button to stop. Located on the face

of the Control Unit.

SPEED CONTROL DIAL

Adjust speed by turning the dial 0.3 – 8.6 RPM (4 – 52º/s). Located on the face

of the Control Unit.

POWER SWITCH

Use this switch, in the left rear of the Control Unit, to turn on and turn off power

to the test stand. Power is indicated by an amber light on the face of the Control

Unit.

POWER PLUG RECEPTACLE

Located in the left rear of the Control Unit. Plug the power cord in here.

CONTROL CABLE

Plug this cable into the lower male connector on the test stand, adjacent to the

motor.

SPECIFICATIONS

1 2 3 4 5 6 7 8 9

Brak uwag

Checkline TST Instrukcja Użytkownika Strona 8