Checkline MLT Instrukcja Użytkownika Pobierz pdf (Strona 6)

Switching the MLT WESCO off

Press the rotary knob (4) for approx. 2 seconds.

"OFF" is shown on the display.

The MLT WESCO is switched off.

NOTE!

The MLT WESCO is automatically switched off

after approx. 5 minutes of disuse.

NOTE!

The MLT WESCO is automatically switched

off after approx. 15 minutes of a continuous

measuring process.

Settings

Switching the MLT WESCO on

Switch the MLT WESCO on by a short press of the

rotary knob (4).

The previously set measuring mode, e.g. "YARN

LENGTH", is shown on the display.

"MEASURE"

Initial Commissioning of the MLT

WESCO

For measuring yarn lengths, the MLT WESCO can both

be set to a metrical length unit (m/min) as well as to an

English length unit (yd/min).

m/min oder yd/min auswählen

Switch the MLT WESCO on by pressing the rotary

knob for at least 2 seconds.

The software version is shortly shown on the display.

Then, "SET mode" is displayed.

"m/min m" or "yd/min inch"

Select the desired "m/min m" or "yd/min inch" setting

by turning the rotary knob to the left or the right.

 

knob.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Brak uwag

Checkline MLT Instrukcja Użytkownika Strona 6